Sonero X-AVT105, Инструкция по эксплуатации

Страница: 10 / 14

OPERATION
Emulating the Monitor
1 Connect the source with male port of the EDID Emulator and the Female
port of the EDID Emulator with the Monitor/TV
2 Disconnect the EDID Emulator from the Monitor once and the EDID
Emulator saved the resolution and the power indicator starts to flash.
Reset the EDID Emulator
3 To reset the EDID Emulator settings, keep the source connected with
the male port of the EDID Emulator and disconnect the Female port of
the EDID Emulator with the Monitor/TV
4 Keep the female port of the EDID Emulator empty for 10 Seconds, and
then the Emulator reset is done
MAINTENANCE
There are no components located inside the product that require
maintenance Never open or attempt to dismantle the product
Maintenance, modifications and repairs are to be performed exclusively by
an expert or at a qualified shop.
If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel
- 10 -