10
OPERATION AND CONNECTION DIAGRAM
Attention:
The X-AOC210 series is designed for use with the +5V passive
power, supplied through pin 18 on the HDMI connection from
the source device. This +5V connection, as well as powering the
internal fiber optic module, is also carried through to the other
sink via a full standard copper connection. Please make sure, that
the source device is capable of delivering more than 500mA.
This cable can only be used in one direction. The connectors are
marked with “SOURCE” and “DISPLAY”. Each connector must be
plugged into the correct port to avoid signal loss.
Before using this cable, please make sure that all devices which
will be connected with the AOC HDMI Cable are shut down and
without power.
Then you can start to connect the “source side” of the HDMI plug
to the transmitter and connect the “display side” of the other
HDMI plug to the receiver/display.
This works without additional power supply.
We do not recommend using any intermediate cables or
adapters between the connections, as the signal transmission
performance maybe attenuated.
Switch on the power of the device of the HDMI source and the
display.