BLUETOOTH KEYBOARD
– USER MANUAL
4
6
Access to the extended keyboard characters
Not all characters and symbols on the keyboard are supported by the meter. Symbols
used in MPI-530 / 530-IT are shown in Fig. 2.
Fig. 2. The view of the keys used while cooperating with the MPI-530 / 530-IT meter
1.
Access to the features described on the keyboard
as F1…F4 is obtained by pressing and
holding the
Fn
key before pressing the target key.
2.
A dot is obtained by pressing and holding the
Fn
button and pressing the "
/.
" button, a
comma is obtained by pressing and holding the
Fn
button and pressing the
M
or
K
button.
3.
For capital letters, press and hold the
Shift
key before pressing the letter button.
4.
The
button is used to switch the keypad backlight on and off
– function only active when
connected to the meter.