Sonel LKZ-1500, Руководство пользователя, Страница: 23 / 60

LKZ-1500-
LITE ● LKZ-1500 – USER MANUAL
21
4.5 Operating modes of the receiver
The Receiver operates in following modes;

TRACE
– to locate the utility and detect its depth and operating frequency current flowing
through it. The display of this mode is shown in Fig. 19 .

TRACE-SENSOR
– to locate the utility insulation damage and detect the depth of damaged
area; to detect the short-circuited areas or wire break and select the conductors in the multi-
core cables. The display of this mode is shown in
Fig. 21 .
To change the mode, press and hold the button for 2 seconds.
Additionally with the COMPASS LINE option switched on, the direction of the located cable rela-
tive to the Receiver will be displayed. The display of the TRACE mode with COMPASS LINE feature
is shown in
Fig. 20 , in the TRACE-SENSOR mode
– in
Fig. 22 .
Fig. 19. Display in "Track" mode Fig. 20.
Display with compass and “Trace”
mode
Fig. 21. Display
in „Track-SENSOR” mode
Fig. 22.
Display with compass in „Track-
SENSOR” mode
The indicator of the input signal strength in dB (for locating by peak and null) turns red
when the corresponding input channels are overloaded (See Pos. 13, Pos. 8
Fig. 19 ).