Sonel CMM-11, Руководство пользователя

Страница: 55 / 100

CMM-11
– USER MANUAL
53
6.3 Button HOLD
6.3.1 HOLD function
This function is used to 'freeze' the measurement result on the
display. To do this, shortly press HOLD button. When the func-
tion is enabled, the display shows symbol H .
To return to the normal operation mode of the device, press
HOLD button again.
6.3.2 Display backlight
Pressing and holding HOLD button for 2 seconds will turn
ON/OFF the display backlight function.
6.4 Auto-Off
The meter automatically shuts off after 15 minutes of user inac-
tivity. Symbol in the upper left corner of the display indicates ac-
tivated function.
Auto-off function may be temporarily disabled. For this purpose:

set the rotary switch at OFF position,

press and hold MODE button,

set the rotary switch at the desired measuring function,

wait until the meter reaches the measurement readiness,

release MODE button.
Note:
Each pass of the rotary switch through "OFF" position with
non-pressed MODE button, will activate again the Auto-Off
function.