Soneco SCS, Руководство пользователя

Страница: 7 / 12

™
Starting up the device:
Press the function button continuously to switch the device on. The yellow
indicator light turns on. The device gives a sound signal (bip) when you
press the button. Release the button when the yellow light begins to blink.
Soneco SCS then gives a sound signal (bip). If you have not set any
phone numbers in the device, it automatically enters the number setting
mode when it is switched on. The device connects to the telephone
network when you switch it on. When it has done this, the green indicator
light begins to blink about once every two seconds. At this point the sound
assisted model SCS gives a double beep (bip bip). After that the device is
in the standby mode, and you can make and receive calls. If you want to
change the phone numbers set earlier, see chapter Setting phone
numbers .
Switching off the device:
To switch off the device, press the function button continuously until all
indicator lights turn on. The lights turn off, each in turn (green, yellow,
red), and the device switches itself off. Soneco
SCS gives a sound signal
(beep) when you can release the function button. The releasing is
confirmed with a series of short beeps (bip bip bip). You cannot make or
receive calls when the device is switched off. To enable calls, switch the
device on.
NOTE! Release the function button immediately after all indicator lights
have turned on when you are switching the device off. Otherwise you may
accidentally make an emergency call, see chapter
Emergency calls .
Setting phone numbers:
You have to set one or several phone numbers in the device to be able to
make calls. Numbers are set by sending the desired numbers to the device
by an SMS message. You can set one, two or three phone numbers in the
device, depending on your needs.
The format of the SMS is
<<< number1;number2 >>> where
• number1 is the first phone number to be selected (for sms sending
and call making)
•
number2 is the second number to be selected (for sms sending)
for example: <<<083114486>>>
or <<<083114486;0107788300>>>
The phone numbers can be either in the international (+358…) or
domestic (0x…) format, but always without hyphen or space, and
divided from each other by a semicolon.
7