Thanks for your purchase!
Our car audio equipment lets you enjoy diversified functions and
enjoy superior music quality. We hope you enjoy this product.
INDEX
Specification __________________________________________ P. 2
Installation ___________________________________________ _ P. 3
Button and key functions _________________________________ P. 5
Radio operation ________________________________________ P. 6
MP3 Play operation _____________________________________ P. 7
Clock operation ________________________________________ P. 8
Bluetooth operation _____________________________________ P. 8
Registration ___________________________________________ P. 10
Electrical Connection Warning ____________________________ P. 10
Troubleshooting ________________________________________ P. 11
Changing the fuse_______________________________________ P. 12
Detaching the front panel _________________________________ P. 12
Connector cleaning ______________________________________ P. 12
CAUTION
This unit is designed to operate on 12-volts DC, negative
ground electrical system only, do not attempt to install this unit
in a vehicle having a positive ground system. Please do not
install the unit to a +24V truck, bus or RV, otherwise the
machine will be damaged.
You should not touch the high-polished playback head with any
metallic or magnetic tools.
Please do not replace the power fuse without professional
guidance. Improper use of fuses may cause damage or fire.
To avoid electric shock caused by short circuit, or any
unnecessary damage and fire, please prevent the product from
being exposed to a wet environment and water.
Metal parts of this unit (especially on the back) become quite
hot during operation, avoid touching parts other than the handle
immediately after removing the unit.
Note:
1.
When the machine is abnormal in operation, please tap the
Reset key on the panel, the machine will resume to factory
settings.
2.
When the inside temperature of car is much higher or lower,
please adjust the temperature in car first, then use the machine.
3.
Avoid suffering strong shock or impact, which will damage
structural components of the machine.
4.
Operate the unit in accordance with the instruction manual,
damage caused by mal-operation is not covered under warranty.
5.
Your unit has a built-in filtering to eliminate most of the noise that
might come through the power source. However, with some
vehicles, particularly older models, some clicking or other unwanted
noise might be present.
Specification:
Tuner Section:
Frequency Range ________________________ 87.5MHz-108MHz
Intermediate frequency____________________ 10.7MHZ
Signal to noise ratio (S/N)__________________ ≥50dB
Play Section:
Signal to noise ratio (S/N)__________________ ≥50dB
Channel Separation (1KHZ) ________________ ≥50dB
Voltage Harmonic Distortion________________ ≤5%
Frequency Response ______________________ 100Hz-10kHz (+6dB)
Amplifier Section:
Output __________________________________ speaker output
Speaker Impedance ________________________ 4Ω-8Ω
Power source_____________________________ 12V DC car battery
(the negative pole connect ground, see on the unit in detail)
1
2
