Remote control via GSM that works by sending and receiving SMS (configurable in 2 languages, Spanish /
English). Ability to operate powered 12V ideal photovoltaic installations.
TELKAN 1 GSM
Telephonic Control Via GSM Code:19.077
Manual of installation and use
230V~ +10% -15% 50Hz max. 2VA
DESCRIPTION
Power supply
on
Z
in alarm
off
Z
Without alarm
LED´s
SIM card
Application
(relay)
5A 250V~ SPST. Relay with free voltage-contact (operation as a switch)
Input for temperature probe
Connection for temperature probe PTC2000 (-40°C ... + 140°C). When the
probe detects that the temperature has crossed the threshold defined by
the user, the controller sends an SMS alarm only to phone number that has
been activate INFO function. (F. MEET, can activate the desired relay).
on
Z
relay connected
off
Z
relay disconnected
r1
(Relay)
External antenna connector
Connection for external antenna with magnetic base
Contact closure alarms
When open / close contact for more than 5 seconds generates an alarm
a1
(Alarm)
on
Z
in temperature alarm
off
Z
without temperature alarm
blinking
Z
Connection error
t1
(Probe)
Input for external battery
External input for a sealed lead battery of 12V and a
capacity of 1.2 to 20Ah.
on
Z
power supply by battery
off
Z
power supply by 230V~
on
Z
powered supply
off
Z
without power supply
on
Z
wiht signal GSM
off
Z
without signal GSM
blinking
Z
sending dates or
SMS received
on
Z
inserted and operational
off
Z
without card SIM
blinking
Z
the card has PIN
(take out of TELKAN & disabled the PIN)
b1
(Battery)
PWR
(Power supply)
GSM
(Signal)
SIM
(Card)
Button ON / OFF
Connect / disconnect the relays manually without sending message.
R1
R2
A1
A2
T1
T2
C1
B1
BAT
PWR GSM
SIM
SIM
R1
R2
RELAY
ON/OFF
TELKAN
GSM
by Sonder
TELKAN
GSM
by Sonder
L
230V~
N
SIM
ANTENNA
L
N
Contact Alarm
Temperature Probe
PTC2000
T1
A1
+
-
Battery
B1
5A
R1
C
NO
SIM:
Works with prepaid card or contract of any company, it is recommended the prepaid for save money. Before
purchasing the SIM, verify what company has the better coverage in the area. (SIM not included)
1 Input for external battery
: When detecting a change of power (battery passes network or vice versa) sends
SMS warning of network failure and SMS of service restoration. (Battery not supplied, code: 7.190)
1 Relay 5A
: You can activate/deactivate manually or by SMS, activate /deactivate timed and query the status of
the relay.
1 Input for T Probe:
allows receive warnings of a temperature alarm, the relay can be linked to temperature
alarm and view the history of temperatures for the last 4 hours via SMS. (Probes not supplied, code: 4.343)
1 Alarm contact
: When open / close contact for more than 5 seconds will generate an alarm.
IP65 Box
: Box for surface mounting. (Box not supplied, code: 4.914)
Before giving the power to the control, remove the SIM card PIN and insert it into the TELKAN
START UP
3
3
1
1
- Measures: Rail-DIN box 4 modules (90x70x58 mm)
- Independent dispositive
- Free-voltage contact relay
- Wiring type: H05VV-F or H05RR-F
- Power supply: 230V~ +10% -15% 50/60Hz max. 2VA
2
2
- Minimum section for cable of: Relay
Z
2,5 mm Power supply
Z
1 mm
- According normative:
EN 60730 / EN 301511 / EN 301489-1 / EN 301489-7
- Contamination degree: clean environment
- Software classe A - Action type 1.B
- Environment: Temperature
Z
0°C to 45°C / Humidity
Z
20% to 85%
TECHNICAL SPECIFICATIONS
Electrical drawing:
230V~
5 - Connect the control to the power supply 230V~
2 - Check with a mobile phone the SIM (which has no access PIN code, the credit,
sending and receiving SMS).
1 - Install the control away from contactors, motors ... etc.
It may be the case with
some contactor with strong electromagnetic peaks need to install a relay
between the output of TELKAN and the contactor coil.
4 - make the rest of connections.
3 - Insert SIM in
TELKAN
.
4
4
BAT
PWR GSM
SIM
BAT
PWR GSM
SIM
BAT
PWR GSM
SIM
5
5
IP20
If the installation was successful should light the LEDs:
PWR
,
SIM
and
GSM
Cardholder to insert a MiniSIM that is
operational and any company. Does
not work with MiniSIM card or the
phone number doubled.
Do not insert
or remove the SIM card with the
Sondertel powered.
OPERATING TEMPERATURE ALARM
30°C
31°C
29°C
Temperature
Device is
out
of alarm
Device is
inside
the alarm
Delays are very useful to discriminate when a temperature alarm of a product load in cold rooms where there are short peaks and temperature are controlled.
First off set the temperature for alarm for example 30°C ± 1°C (differential of activation) may also indicate the time that has to remain above or below to consider that is in alarm.
You can define two different values or the same for the delay time (Delay). Factory goes to 0 and alerts at the same time the temperature goes from temp alarm ± 1°C.
5 min.
Actives the alarm in case of being more than 5 minutes (time delay) above 31°C
(temperature alarm + differential) and does not disable the alarm until it is below of
29°C over 5 minutes (temperature alarm - differential)
0000 alarm t1 30
delays 5 minutes for activation and deactivation
Temperature for alarm: 30°C + fixed Dif.: ± 1°C
0000 delay t1 5
SMS
We decline any responsibility for damaged equipment result
- Equipment whose serial number has been damaged,
- Devices whose deterioration is the result of impact or liquid
Reserved the right to change without prior notice.
This device has 3 year warranty according to the date of manufacture,
it is limited to replacement of faulty part. Transport not included.
of poor handling. Not included in the warranty:
deleted or modified.
- Devices whose connection or use has not been executed
according to the instructions accompanying the appliance.
- Apparatus modified without the consent of the manufacturer.
or gaseous emanations.
For the rest of general conditions visit our web.
CONDITIONS OF GUARANTEE
SONDER
Cod.:7259 INGV4 ENE19
delay for activation 5 and 10 minutes for deactivation
0000 delay t1 5 10
- Send an wrong SMS to the
TELKAN
from a phone that had
previously made valid orders.
- The
TELKAN
saves the last 5 phone numbers that have given a correct order and if they make a lost call, the TELKAN sends an SMS of state, but the SMS that an alarm has
occurred only is sent to the numbers set in INFORM function.
- The temperature exceeds the limit set by the user
Alarm: T1
T1: 33.5C
A1: off
B1: MAIN
ERROR: invalid language. 0-Castellano, 1-English.
- If a request to change languages includes an invalid number
T1: 26.8C
A1: off
B1: MAIN
- Message received periodically according to set time with
the function
Alive
activated
IN CASE OF:
SMS received
- If the SMS received by the
TELKAN
not start with numeric digits and comes from an unknown telephone is interpreted as a message from the phone company:
• If the control is configured with the function PROMO in on, the SMS is forwarding to all phones set in Function Inofrm
• If the control is configured with the function PROMO in off, is deleted.
pwrd +
on - relay on
off - relay off
inform on - receive alarm
test - status
pass xxxx - change password
Probe set for alarm
Reading probe alarm
Disconnected alarm contact
Main power supply
Temperature read by probe T1
Alarm 1 off
Main power supply
Example:
Control device for DIN rail mounting and
connection via fixed pipeline.
Very important:
When installing control ensure you have good
coverage away from contactors and other
signals that may interfere.
Device designed for a situation of pollution
clean.
This control is not a safety device, and can not be
used as such, it is the installer responsibility
incorporate adequate protection to every type
of installation (
HOMOLOGATED
)
- Make a call to
TELKAN
from a phone that had previously
made valid orders.
R1: on
T1: 26.8C
A1: off
B1: BATT (11.799V)
Must comply with 2 factors: Tempe Time Set
Password (set from factory to 0000) + followed by the command:
order - (meaning that order)
SMS
Status query
:
State relays
Current temperature read by probes
Alarm status
battery connected (value of charge)
Warning! The volatge of
the battery is very low.
BATT (9.112V)
- Message received when the control detects that the
battery power is low.
Warning low battery with charge value
OK
MiniSIM
MicroSIM NanoSIM
Sonder Regulación, S.A.
Avda. La Llana, 93
08191 RUBÍ
(Barcelona) Spain
www.sonder.es
