3. Gently, lay the back of the drawer box
(C) on a soft flat surface. Attach the
Metal base (D) into the bottom of the
drawer box, align and insert Allen bolt
(1) to each fixed nuts under drawer
box through the hole on the top of the
metal base. Tighten all the bolts by
using wrench (2). DO NOT OVER
TIGHTEN. See
FIGURE 02.
4. Repeat to attach other metal base
with second drawer box.
5. After assembly, bring the both of the
drawer box upright on flat surface.
6. Preset the both of base assembled on
your desired location. Distance
between the inside surface of the both
drawer box should be 624mm. See
FIGURE 03.
7. Bring the Top assembled and set it on
the top of the base. Align the metal
frame with fixed nuts on the top of the
drawer box. Once the metal frame is
set, insert Allen bolt (1) as FIGURE 04.
624mm
2 2
/
