Soncoz SGP1, Руководство пользователя

Страница: 9 / 12

1 Right Channel Balanced XLR Input(XLR R)
2 Left Channel Balanced XLR Input(XLR L)
3 Right Channel Speaker Binding Posts(OUT R+/R-)
4 Left Channel Speaker Binding Posts(OUT L+/L-)
5 Voltage Level Switch(Default: AC~230V): Please check the correct voltage
before using SGP1 and the wrong voltage will damage it
115V for AC 100~120V @50/60Hz 230V for AC 220~240V @50/60Hz
6 AC Power Input Connector(Include Backup Fuse)
7 I/O Trigger Input Connector
03 OPERATIONS AND STATUS INDICATORS
1 Turn On/Off the Power
Turn down the audio source before turning the unit on for the first time
Press the PWR button to turn the unit on or off
In the event of a total loss of AC power, all lights will slowly turn off within
30 seconds
02 QUICK START GUIDE
1 Connect all cables before turning the unit on
2 Ensure the Speaker Binding Posts(OUT R+/R-/L+/L-)do not short circuit or
connect to ground
3 Check your local voltage level switches before turning the unit on
4 Turn down the audio source before turning the unit on for the first time
5 SGP1 is a pure power amplifier, which requires the audio source component
to have Pre-Amp function
6 In order to avoid damaging the speaker, make sure that the Pre-Amp volume
is low when you start it up for the first time
7 When you need to replace or disconnect a cable, please turn off SGP1 first
8 Please turn off SGP1 by press the power button first, then pull out the power
cable or cut the main power
2 PWR: Power Status Indicator
Orange LED light is Off = Power is Off
Orange LED light is On = Power is On = Normal operation
07