Section
Displays, Indicators, and Controls
AirWave System Operator’s Manual
15
6. Basic Navigation and Editing
a. Navigation from screen to screen of the AirWave Monitor occurs in one of two ways:
Using the
Function Buttons
– These buttons provide specific contextual functionality for the current
screen as indicated by the icons displayed to the left of the buttons.
Selecting from a list
– On the
Main Menu Screen
(Gear Icon
), items are selected from a list by
using the
Navigation Arrows
and pressing the
Enter
button to enter that screen.
b. Certain screens of the AirWave Monitor contain fields that can be edited.
Navigation between these fields occurs by using the navigation arrows. The active field is designated
by a yellow highlight:
Figure F-9
To edit the field, press the
Enter
button, which turns the highlight from yellow to white:
Figure F-10
Modify the field value by using the up and down navigation arrows. In some cases, individual digits of
a value are modified separately and the left and right arrows navigate between the digits.
To lock in the new value, press the
Enter
button again. This turns the highlight back to yellow. At
this point, the navigation arrows move the focus to different fields to make changes.
When exiting the screen (usually by using the
Return Arrow
function button), the system prompts
to accept or cancel any changes (see Figure F-11).
Figure F-11
Selecting the function button next to the green checkmark confirms all modifications made on the
screen; the Monitor also sounds a confirmatory tone. Selecting the red X function button returns all
values on the screen to their previous values.
G. AirWave System Operation
This section describes the standard operation of the SonarMed AirWave system.
