Sonardyne um-8370 Скачать руководство пользователя

Страница: 2 / 46

User Manual for the Type 8370

WSM 6+ Transponder

UM-8370

Issue A Rev 1

This user manual is the copyright and intellectual property right of Sonardyne International Limited

(“Sonardyne”) and is provided solely for the customer’s use of the Sonardyne equipment as

described in this user manual and in accordance with Sonardyne’s then prevailing terms and

conditions of sale. This user manual has been compiled to the best of Sonardyne’s knowledge and

belief, but no representation, warranty (whether express or implied) or guarantee is made to any

persons or legal entities as to the accuracy, reliability or completeness of the information contained

in this user manual.
This user manual contains the proprietary, confidential information of Sonardyne and other third

parties and as such may not be used, disclosed or placed in the public domain (by whatever means)

by the customer except expressly in accordance with and subject to the above referenced terms

and conditions of sale.
The copyright and any and all intellectual property rights of any and all third parties which may be

referenced in this user manual or which may have provided proprietary products and/or software

and/or documentation (in whatever format) to Sonardyne in respect of the Sonardyne equipment as

described in this user manual is hereby duly acknowledged.
The Sonardyne equipment described in this user manual is protected by UK Patent No. 2415113,

US Patent No. 8,139,442 and other patents internationally. 6G

and Sonardyne Wideband

are

registered trademarks of Sonardyne International Limited.
© Sonardyne International Limited 2015. All rights reserved.

Содержание um-8370















































Результаты поиска

Содержание um-8370

Отзывы:

Похожие инструкции для um-8370

Бренды по названию

Популярные бренды

Sonardyne um-8370, Руководство пользователя

Результаты поиска

Содержание um-8370

Отзывы:

Похожие инструкции для um-8370

Бренды по названию

Популярные бренды