Non Cutoff Wall Pack Light Installation Guide
INSTALLATION DIAGRAM
REV: 21 0101 0000
TYPE
DATE
PROJECT
NOTES
www.sonarayled.com
®
©2021 | SONARAY LED LIGHTING HEADQUARTERS | 34 LAKEVIEW COURT VERONA, VA 24482 USA | OFFICE 844.202.5606 | FAX 540.242.7221
1. Be sure that the power is turned off before
installation.
2. Remove the upper cover from the fixture by unscrewing the
two screws on the side.
3. Drill two holes on the wall then drill the correspaonding
holes into the fixture’s base plate using the dimensions above.
Please note the unit of measurement is in mm.
4. Install the base plate onto the wall and fasten with the
three screws provided.
5. Pull the wiring through the hole in the base plate and
make the connection.
6. Connect the fixture housing back onto the base plate by
re-attaching the two screws on the side.
