background image

IMPORTANT SAFETY INFORMATION

1.  Read Instructions

 — All these safety and operating  

 

    instructions should be read before you operate the unit.

2.  Retain Instructions

 — These safety and operating  

    instructions should be retained for future reference.

3.  Heed Warnings

 — All warnings on the unit and in the  

 

    operating instructions should be adhered to.

4.  Follow Instructions

 — All operating and use instructions

    should be followed.

5.  Water and Moisture

 — The unit should not be used near

    water — for example, near a bathtub, washbowl, kitchen

    sink, in a wet basement, or near a swimming pool, etc.

6.  Carts and Stands

 — The unit should be   

 

 

    used only with a cart or stand that is  

 

 

    recommended by the manufacturer.

    A unit and cart combination should be    

 

    moved with care. Quick stops, excessive   

 

    force, and uneven surfaces may cause 

    the unit and cart combination to overturn.

7. CAUTION:

 

To prevent electric shock, do not use the

    subwoofer’s polarized plug with an extension cord,

    receptacle, or other outlets unless the blades can be

    fully inserted to prevent blade exposure.

8. Ventilation 

— The unit should be situated so that its

    location or position does not interfere with its proper

    ventilation. For example, the unit should not be placed in a    

    built-in installation, such as a bookcase or cabinet, that may  

    impede the flow of air over the back plate.

9.  Heat

 — The unit should be situated away from heat  

    sources such as radiators, heat registers, stoves, or other

    appliances (including other audio components) that

    produce heat.

IMPORTANT: READ ALL OF THESE INSTRUCTIONS BEFORE YOU 

INSTALL OR OPERATE YOUR SUBWOOFER AND SAVE THESE 

INSTRUCTIONS FOR LATER USE.

IMPORTANT: READ ALL OF THESE INSTRUCTIONS BEFORE 
YOU INSTALL OR OPERATE YOUR SUBWOOFER, AND SAVE 
THESE INSTRUCTIONS FOR LATER USE.

1. Read Instructions

— All these safety and operating instruc-

tions should be read before you operate the unit.

2. Retain Instructions

— These safety and operating instruc-

tions should be retained for future reference.

3. Heed Warnings

— All warnings on the unit and in the oper-

ating instructions should be adhered to.

4. Follow  Instructions

—  All  operating  and  use  instructions

should be followed.

5. Water  and  Moisture

—  The  unit  should  not  be  used  near

water  —  for  example,  near  a  bathtub,  washbowl,  kitchen

sink, laundry tub, in a wet  basement, or near a swimming

pool, etc.

6. Carts  and  Stands

—  The  unit  should  be  used  only  with  a

cart or stand that is recommended by the manufacturer.

A  unit  and  cart  combination  should  be  moved  with  care.

Quick stops, excessive force, and uneven surfaces may cause

the unit and cart combination to overturn.

7. CAUTION:  To  prevent  electric  shock,  do  not  use  the

subwoofer’s  polarized  plug  with  an  extension  cord,

receptacle,  or  other  outlets  unless  the  blades  can  be

fully inserted to prevent blade exposure.

8. Ventilation

—  The  unit  should  be  situated  so  that  its 

location  or  position  does  not  interfere  with  its  proper 

ventilation.  For example, the unit should not be situated on

a  bed,  sofa,  rug,  or  similar  surface  that  may  block 

the  ventilation  openings;  or  be  placed  in  a  built-in 

installation, such as a bookcase or cabinet, that may impede

the flow of air through the ventilation openings.

9. Heat

— The unit should be situated away from heat sources

such  as  radiators,  heat  registers,  stoves,  or  other 

appliances  (including  other  audio  components)  that 

produce heat.

10. Power Sources

— The unit should be connected to a power

supply  only  of  the  type  described  in  the  operating 

instructions or as marked on the unit.

11. Grounding or Polarization

— Precautions should be taken

so that the grounding or polarization means of the unit is not

defeated.

12. Power Cord Protection

— Power cords should be routed so

that they are not likely to be walked on or pinched by items

placed upon or against them, paying particular attention to

cords at plugs, convenience receptacles, and the point where

they exit from the controller.

13. Cleaning

—  The  unit  should  be  cleaned  only  as 

recommended by the manufacturer.

14. Non-Use Periods

— The power cord of the unit should be

unplugged from the outlet when left unused for a long peri-

od of time.

15. Object  and  Liquid  Entry

—  Care  should  be  taken  so  that

objects do not fall and liquids are not spilled into the enclo-

sure through openings.

16. Damage  Requiring  Service

—  The  unit  should  be 

serviced by qualified service personnel when:

• The power cord or the plug has been damaged.
• Objects have fallen or liquid has been spilled into the unit.
• The unit has been exposed to rain.
• The unit does not appear to operate normally or exhibits a

marked change in performance.

• The unit has been dropped or the enclosure damaged.

17. Servicing

— The user should not attempt to service the unit

beyond  that  described  in  the  operating  instructions. 

All other servicing should be referred to qualified service per-

sonnel.

Important Safety Information

The lightning flash with arrowhead 

symbol,  within  an  equilateral 

triangle,  is  intended  to  alert  the 

user to the presence of uninsulated 

dangerous  voltage  within  the 

product’s enclosure that may be of 

sufficient magnitude to constitute a 

risk of electric shock to persons. 

The  exclamation  point  within 

an  equilateral  triangle  is 

intended to alert the user to the 

presence  of  important  operat-

ing 

and 

maintenance 

(servicing)  instructions  in  the 

literature  accompanying  the 

appliance. 

TO  PREVENT  FIRE  OR  SHOCK 

HAZARD, DO NOT EXPOSE THIS APPLI-

ANCE  TO  RAIN  OR  MOISTURE.  THE 

APPLIANCE SHALL NOT BE EXPOSED 

TO  DRIPPING  OR  SPLASHING.  NO 

OBJECTS FILLED WITH LIQUIDS SHALL 

BE PLACED ON THE APPLIANCE.

TO  REDUCE THE  RISK  OF  ELECTRIC 

SHOCK, DO NOT REMOVE COVER OR 

BACK. NO USER-SERVICEABLE PARTS 

INSIDE. REFER SERVICING TO AUTHO-

RIZED SERVICE PERSONNEL. 

CAUTION: 

IMPORTANT: READ ALL OF THESE INSTRUCTIONS BEFORE 
YOU INSTALL OR OPERATE YOUR SUBWOOFER, AND SAVE 
THESE INSTRUCTIONS FOR LATER USE.

1. Read Instructions

— All these safety and operating instruc-

tions should be read before you operate the unit.

2. Retain Instructions

— These safety and operating instruc-

tions should be retained for future reference.

3. Heed Warnings

— All warnings on the unit and in the oper-

ating instructions should be adhered to.

4. Follow  Instructions

—  All  operating  and  use  instructions

should be followed.

5. Water  and  Moisture

—  The  unit  should  not  be  used  near

water  —  for  example,  near  a  bathtub,  washbowl,  kitchen

sink, laundry tub, in a wet  basement, or near a swimming

pool, etc.

6. Carts  and  Stands

—  The  unit  should  be  used  only  with  a

cart or stand that is recommended by the manufacturer.

A  unit  and  cart  combination  should  be  moved  with  care.

Quick stops, excessive force, and uneven surfaces may cause

the unit and cart combination to overturn.

7. CAUTION:  To  prevent  electric  shock,  do  not  use  the

subwoofer’s  polarized  plug  with  an  extension  cord,

receptacle,  or  other  outlets  unless  the  blades  can  be

fully inserted to prevent blade exposure.

8. Ventilation

—  The  unit  should  be  situated  so  that  its 

location  or  position  does  not  interfere  with  its  proper 

ventilation.  For example, the unit should not be situated on

a  bed,  sofa,  rug,  or  similar  surface  that  may  block 

the  ventilation  openings;  or  be  placed  in  a  built-in 

installation, such as a bookcase or cabinet, that may impede

the flow of air through the ventilation openings.

9. Heat

— The unit should be situated away from heat sources

such  as  radiators,  heat  registers,  stoves,  or  other 

appliances  (including  other  audio  components)  that 

produce heat.

10. Power Sources

— The unit should be connected to a power

supply  only  of  the  type  described  in  the  operating 

instructions or as marked on the unit.

11. Grounding or Polarization

— Precautions should be taken

so that the grounding or polarization means of the unit is not

defeated.

12. Power Cord Protection

— Power cords should be routed so

that they are not likely to be walked on or pinched by items

placed upon or against them, paying particular attention to

cords at plugs, convenience receptacles, and the point where

they exit from the controller.

13. Cleaning

—  The  unit  should  be  cleaned  only  as 

recommended by the manufacturer.

14. Non-Use Periods

— The power cord of the unit should be

unplugged from the outlet when left unused for a long peri-

od of time.

15. Object  and  Liquid  Entry

—  Care  should  be  taken  so  that

objects do not fall and liquids are not spilled into the enclo-

sure through openings.

16. Damage  Requiring  Service

—  The  unit  should  be 

serviced by qualified service personnel when:

• The power cord or the plug has been damaged.
• Objects have fallen or liquid has been spilled into the unit.
• The unit has been exposed to rain.
• The unit does not appear to operate normally or exhibits a

marked change in performance.

• The unit has been dropped or the enclosure damaged.

17. Servicing

— The user should not attempt to service the unit

beyond  that  described  in  the  operating  instructions. 

All other servicing should be referred to qualified service per-

sonnel.

Important Safety Information

The lightning flash with arrowhead 

symbol,  within  an  equilateral 

triangle,  is  intended  to  alert  the 

user to the presence of uninsulated 

dangerous  voltage  within  the 

product’s enclosure that may be of 

sufficient magnitude to constitute a 

risk of electric shock to persons. 

The  exclamation  point  within 

an  equilateral  triangle  is 

intended to alert the user to the 

presence  of  important  operat-

ing 

and 

maintenance 

(servicing)  instructions  in  the 

literature  accompanying  the 

appliance. 

TO  PREVENT  FIRE  OR  SHOCK 

HAZARD, DO NOT EXPOSE THIS APPLI-

ANCE  TO  RAIN  OR  MOISTURE.  THE 

APPLIANCE SHALL NOT BE EXPOSED 

TO  DRIPPING  OR  SPLASHING.  NO 

OBJECTS FILLED WITH LIQUIDS SHALL 

BE PLACED ON THE APPLIANCE.

TO  REDUCE THE  RISK  OF  ELECTRIC 

SHOCK, DO NOT REMOVE COVER OR 

BACK. NO USER-SERVICEABLE PARTS 

INSIDE. REFER SERVICING TO AUTHO-

RIZED SERVICE PERSONNEL. 

CAUTION: 

10. Power Sources

 — The unit should be connected to a  

    power supply only of the type described in the operating

    instructions or as marked on the unit.

11. Accessories and Attachments

 — Only use accessories   

    and attachments specified by the manufacturer.

12. Grounding or Polarization

 — Precautions should be  

    taken so that the grounding or polarization means of the  

    unit is not defeated.

13. Power Cord Protection

 — Power cords should be routed  

    so that they are not likely to be walked on or pinched by

    items placed upon or against them, paying particular  

    attention to cords at plugs, convenience receptacles, and  

    the point where they exit from the controller.

14. Cleaning

 — The unit should be cleaned only as

 

recommended by the manufacturer.

15. Non-Use Periods

 — The power cord of the unit should be

 

unplugged from the outlet when left unused for a long  

 

period of time.

16. Object and Liquid Entry

 — Care should be taken so that

 

objects do not fall and liquids are not spilled into the  

 

enclosure through openings.

17. Damage Requiring Service

 — The unit should be

 

serviced by qualified service personnel when:

 

• The power cord or the plug has been damaged.

 

• Objects have fallen or liquid has been spilled into the unit.

 

• The unit has been exposed to rain.

 

• The unit does not appear to operate normally or exhibits  

 

   a marked change in performance.

 

• The unit has been dropped or the enclosure damaged.

18. Servicing

 — The user should not attempt to service the  

    unit beyond that described in the operating instructions. 

    All other servicing should be referred to qualified 

    service personnel.

This device complies with part 15 of the FCC Rules. 

Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, 

     including interference that may cause 

     undesired operation.

In accordance with the European Union WEEE (Waste Electrical and Electronic Equipment) directive effective 
August 13, 2005, we would like to notify you that this product may contain regulated materials which upon 
disposal, according to the WEEE directive, require special reuse and recycling processing. For this reason 
Sonance has arranged with our distributors in European Union member nations to collect and recycle this 
product at no cost to you. To find your local distributor please contact the dealer from whom you purchased 
this product. Please note, only this product itself falls under the WEEE directive. When disposing of packaging 
and other related shipping materials we encourage you to recycle these items through the normal channels.

DSP 2-150 MKII

Amplifier

Tested to comply 

with FCC Standards for 

home or office use only.

2

Содержание DSP 2-150 MKII





















Отзывы: