| SM10
4
USING THE SM10
Installation
Use the mounting kit included to install SM10 on handle bar.
Connect an audio device such as onboard motorcycle audio system, MP3 player or smart phone to the main port using 3.5mm jack
cable.
If any, connect GPS or radar detector to the auxiliary port using 3.5mm jack cable.
* On the sample SM10 unit, the mounting kit does not fit tightly with SM10. This problem will be fixed in the next hardware version.
* On the sample SM10 unit, a port marked as “AUX” is working as a main port. And a port marked as AUDIO IN is working as a
auxiliary port. This mismatch will be fixed in the next hardware version.
Power ON & OFF
To power on the SM10, slide the power switch to on. To power off, slide the power switch to off.
Bluetooth pairing with a headset
The SM10 must be paired with a Bluetooth headset to stream audio source.
1. Turn on the Bluetooth headset (Refer to the headset user guide)
2. Make the Bluetooth headset into pairing mode (Refer to the headset user guide)
3. Turn on the SM10 audio adapter.
4. The SM10 finds and connects the Bluetooth headset.
Bluetooth pairing with a second headset
1. Turn on the second Bluetooth headset. (Refer to the headset user guide)
2. Make the second Bluetooth headset into pairing mode (Refer to the headset user guide)
3. Turn on the SM10 audio adapter.
4. Press the pairing button for 5 seconds until the red LED is rapidly flashing.
5. The SM10 finds and connects the second Bluetooth headset.
Using with a headset
1. Turn on Bluetooth headsets that are already paired with the SM10.
2. Turn on audio device connected with SM10 and play the music if needed.
3. Turn on the SM10.
4. The SM10 automatically connects to Bluetooth headsets, and you will hear the music or other audio sound.
5. If you can’t hear any sound, press the Pairing button of SM10 once and then SM10 tries to connect the Bluetooth headset
paired again.
** Sena does not guarantee that SM10 supports all other Bluetooth headsets except for the SMH10.
Mute or un-mute AUX
1. To mute or un-mute AUX, press and hold Pairing button for 2 second
