wireless doorbell
Before using the product for the first time, please read the instructions for use below and retain them for
later reference. The original instructions were written in the Hungarian language.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety. Children should be supervised at all times to
ensure that they do not play with the appliance.
individually encoded digital signal transmission
•
portable and also functions as a pager
•
ideal for use in the home, shop, garden,
etc.
•
simple and quick installation
•
no cabling required
INSTALLATION
Pushbutton
Remove the lid under the button by slightly pressing the lid in the middle under the button and sliding it off. Connect the battery (6LR61)
observing the polarity. After replacing the lid, the pushbutton is ready for use.
If you wish to mount the pushbutton, mark the location of the top screw first. Drive in the screw far enough to be able to hang the
pushbutton onto it. Fasten the unit with another screw, through the hole under the battery chamber cover.
Doorbell
Remove the battery chamber cover in the same way as you did with the pushbutton. Insert the two batteries (AA) observing the
polarity. (The correct polarity is marked inside the unit.) Replace the lid. The doorbell is now ready for use.
If you wish to mount the indoor unit, proceed in the same way as when mounting the pushbutton.
Each unit has a custom communication code. If either unit becomes faulty, substitution will not be possible!
WARNINGS
•
The range applies to use in open terrain.
•
Any metal objects or obstructions between the doorbell and pushbutton will reduce the operating range.
•
Do not mount the pushbutton on or near metal surfaces.
•
In temperatures near freezing the battery voltage and thus the range may decrease.
•
Please make sure that the unit is operated in an interference free area in order to ensure a reliable connection.
•
Protect the units from temperature extremes, direct sunlight, dust, humidity and rain.
•
Do not clean using aggressive or abrasive detergents.
•
The main unit is only suitable for indoor use.
•
Do not attempt to disassemble the units. Refer all servicing to a specialist.
•
Keep the batteries away from children.
•
Regularly check the condition of the batteries and replace them if necessary.
SPECIFICATIONS
range in open terrain: 50
m
operating frequency: 433.9 MHz
individual digital code (factory set)
operating temperature: -10°C
– +
40°C
power supply (not included): pushbutton: 9
V (6LR61)
indoor unit: 2 x 1
,
5
V (AA)
Designed for use in member states of the European Union in view of EU radio engineering standards.
IP 40:
Protected from the entry of solid objects larger than 1 mm in size; not protected from water ingress.
Waste equipment must not be collected separately or disposed of with household waste because it may contain components
hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at
any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection
of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any
questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as
prescribed in the relevant regulations and shall bear any associated costs arising.
Содержание home WDB 60
Страница 2: ......
