Somogyi home URC 11T, Инструкция по эксплуатации

Страница: 4 / 44

4
For example, if the selected code is 261:
1. SET + ”1”: 2 fl ashes
2. SET + “2”: 6 fl ashes
3. SET + “3”: 1 fl ash
note: no fl ash means zero
Basic settings
The device has the following pre-programmed codes:
TV1 027 Philips TV
TV2 075 Telefunken TV
VCR1 278 Philips VCR
VCR2 284 Grundig VCR
SAT1 424 Philips Satellite
CBC 807 Nokia Satellite
DVD 525 Philips CD
AUX 559 Philips LD/DVD
Learning function
If you can not set the pre-programmed code, or the remote control
can not control all the function after setting the code, it is possible, to
teach the wanted function of original remote control for any buttons
of URC 11T.
It can learn all function of any infra remote control (heater, air-
conditioning, fan…)
1. Press and hold button SET than press the selected learning device
key: TV, VCR, SAT, DVD, CD/VCD, LD/HIFI/AUX
2. The LED light up and release both key.
3. Input the Code 0-0-0!
4. Press the selected key once, which learn for URC11T. LED starts
to fl ash. The device waits for the learn signal. Device key can not be
learned (TV1-2-3, VCR1-2, SAT1-2, DVD, CD/VCD, LD/HIFI/AUX),
if you press the Device key this time or you do not touch the remote
control for 15 seconds, the system will leave the learning function.
5. Make sure URC 11T LED receiver is pointing at the LED transmitter
of original remote control and keep the 3-4 cm distance. Then press
and hold the selected key of original remote control. LED will light up
continuously and indicated that there is reading the signal. When
the LED fl ash one and then light up continuously, that’s indicated
this key is successful. Release the original remote control key.
6. Repeat the steps from 4 for new function to learn. If you fi nished,
press Device button or do not press anything for 15 seconds.
7. If LED fl ashes 3 times after learning function, and it lights up
continuosly, the learning function process failed.
Favorite channel function
You can use the Favorite channel function to assign various channels
to the FavCH button; by pressing the button, you can switch between
these channels. The number of channels you can assign to the button
depends on the type of your TV set. (This has to do with the number of
digits needed to specify the channel number for the TV set: if you need
to press 0-5 to switch to channel 5, your set uses two digits):