FZ 50
Before using the product for the first time,
please read the instructions for use below
and retain them for later reference. The original
instructions were written in the Hungarian
language.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children should be
supervised at all times to ensure that they do not play with the appliance.
• s
imple and quick installation
• m
obile use
• w
ideband reception
• s
uitable
for both analog and digital signal reception
• d
esktop, wall or even mast
mountable
• h
orizontal or vertical placement
• p
ower supply from line or
receiver
• h
igh gain and low noise design
This indoor antenna can be used for a wide variety of applications to
receive both analog and digital signals within the specified frequency
range. Includes built-in amplifier for high quality signal reception. Thanks to
its design, it is suitable for wall mounted or desktop use. Allows both
horizontal and vertical placement. If your receiver is capable of supplying
power via the antenna connector, the antenna can be used without an AC
adapter.
SETUP
Prior to positioning and orienting the antenna, verify the reception quality.
First connect the antenna connector to the receiver then, unless the
receiver is to power the antenna, connect the AC adapter to the antenna.
By adjusting the antenna’s orientation – turning it right or left and moving it
horizontally and vertically – or its location if necessary, find the position that
provides optimum reception. Tuning the television as well in the meantime
might also prove useful as the given program might be available elsewhere
but in better quality.
Location
Once you have found the optimum orientation and position for the antenna,
secure it. If used on a desktop (Figure 3), insert the desktop base into the
antenna’s housing. If it is to be wall mounted (Figure 5), mark the screw
holes on the wall, drill the holes and hang the antenna using the included
screws and dowels. If it is to be mounted on a mast, first thread the band
through the auxiliary bracket then snap the bracket on the back of the
antenna /Fig. 4/, and use the band to fasten the unit onto the mast. It is
possible to use the auxiliary bracket for wall mounting, too if you need to
maintain a distance from the wall surface.
Power supply /Figure 2/
The antenna can be powered via either an AC adapter or antenna
connector. If your receiver is capable of supplying power via the antenna
connector, it is preferable to use the antenna this way. Please consult the
receiver’s manual for additional information.
Warning: DO NOT use both powering methods at the same time! This can
cause both the antenna and/or the receiver to malfunction.
On reception
This indoor antenna is suitable for receiving terrestrial digital and analog
broadcasts within a 10 km range. Reception is subject to various factors:
- Transmitter power
- Topography
- Large buildings or trees around the transmitter and receiving antenna
- The position of the antenna inside the building /walls, metal objects, etc./
- Electric power cables nearby
In severe cases the reception range can drop to just a few kilometres.
Package contents:
1. Antenna
2. AC adapter
3. band
4. Desktop base
5. Screws & studs
Specifications
:
Frequency range:
. . . . . . . . . . . . . . . . . . . . . . .
UHF: 470 – 862 MHz
VHF: 87,5 – 230 Mhz
Gain:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
UHF: 48 dB
VHF: 46 dB
Max.
output
level:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
100 dB/µV
Noise:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
≤
3 dB
Output impedance:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
75 Ω
Power supply: line:
. . . . . . . . . . . . . . . . . . . . . .
230 V~/50 Hz/3 W
via antenna connector:
. . . . . . . . .
5 V
/ 40 mA
DVB-T indoor antenna with signal amplifier
TV
STB
STB
Set Top Box (STB) =
digital terrestrial receiver
FZ 50
FZ 50
5 V / 40 mA
6 V / 100 mA
OUTPUT / DC IN
5 V 30 mA
6 V 100 mA
OUTPUT / DC IN
5 V 30 mA
6 V 100 mA
power supplied by unit
power supplied by AC adapter
desktop use
wall mounting
mast mounting
AC adapter
socket
DC 6 V / 100 mA
TV output
input
/
DC 5 V / 40 mA
vertical
desktop
horizontal
wall
mast
horizontal
desktop
vertical
wall
Figure 1
Figure
2
Figure
3
Figure
4
Figure
5
