The appliance must not be operated if damaged in any way.
2. Take out the appliance from the box.
3. Screw the supplied feet to the bottom of the heater. (
Figure 3.
). For this, use 4 little screws per foot.
4. Stand the appliance on a solid, horizontal surface. Attention! The appliance may only be operated with its feet mounted
on it.
5. For proper operation, the free flow of hot air has to be ensured, so observe the minimum placement distances shown in
Figure 2.
6. The switches of the appliance must be in OFF position.
7. Connect the appliance into a standard ground wall outlet. Now the appliance is ready for operation.
Caution: Risk of electric shock!
Do not attempt to disassemble or modify the unit or its accessories. In case any part is damaged, immediately
power off the unit and seek the assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced by the manufacturer, its
service facility or similarly qualified personnel.
Do not cover! Covering the unit can cause overheating, fire or electric shock.
FEATURES
smart convector heater, for heating the air of indoor premises ● can be controlled with touch buttons, by remote control or the free
smartphone application ● adjustable output 1000 W / 1300 W / 2300 W● frost guard function ● turbo fan function which can be swit
-
ched independently ● electronic thermostat ● 24-hour switch off timer ● standalone design ● overheating protection
STRUCTURE (Figure 1.)
1. main switch
2. display
3. ON/OFF switch button
4. remote control sensor
5. WIFI reset button
6. heating stage selector
7. fan mode selector
8. thermostat setting buttons
9. timer
10. cold air inlet opening
11. warm air outlet opening
12. carrying handles
13. screws, feet
14. measured temperature
15. set temperature of the thermostat
16. selected heating stage
17. fan indicator
18. frost guard mode
19. switch off timer indicator
OPERATION
The appliance can be controlled with its touch-buttons, by remote control or the free smartphone application.
Switch the main switch (1) on the side of the appliance on. Then the appliance beeps shortly, the measured temperature can be read
on the appliance’s display (14). You can switch the appliance on using the remote control, or the appliance’s ON/OFF switch button (3).
Then, the set temperature (15) can be read on the display next to the measured value.
The turbo fan function can by switched ON/OFF anytime, independently from the set value of the thermostat and the selected heating
stage using the corresponding button (7). The appliance indicates the operation of the fan function on its display (17).
To activate heating mode, after setting the thermostat, you need to select the desired heating stage (6). On the appliance’s display you
can see the selected heating stage (16), or the indicator of the frost guard function (18). If the ambient temperature decreases 1 °C
below the set value, then the appliance switches on. If the ambient temperature reaches the set value, the heating element switches
off.
In case of selecting the frost guard function, the thermostat automatically sets into 5 °C, and if the measured temperature decreases
below it, the appliance switches on in 2300 W heating stage.
It is possible to set switch off timer hourly, for maximum 24 hours, by pressing repeatedly the appliance’s or the remote control’s
corresponding button (9). The set value, and the remaining time until switching off are readable on the display (19).
Smartphone application:
The mobile phone must be connected to the Internet.
1. Scan the QR code with your phone (Figure 4.), then download and install the „Tuya Smart” application.
2. Select the country code and enter your mobile phone number, then press the „Get” button.
3. Enter the („verification code”) you received in SMS, and enter the password you want to use for the application containing numbers