• shows weather forecast with animated symbols
• date display, alarm function
• measures indoor temperature
• measures indoor humidity
• displays current moon phase
Power supply: 2 x AA (1,5 V) batteries (not included)
1. Display
2. MODE button – select
operating mode
0
0
3. SET/ C, F button – switch between
temperature display in Celsius or
Fahrenheit
4. ADJ/MAX,MIN button – change setting,
display minimum/maximum temperature
5. Battery compartment lid
6. SNOOZE/LIGHT button – turn on backlight
and snooze mode
7. Stand
Installation
Insert 2 size AA batteries into the battery
compartment at the back; observe the correct
polarity. The product plays a melody and the
display is turned on.
You can turn on the backlight for 10 seconds by
pressing the SNOOZE/LIGHT button (6).
Setting the current date
0
0
In the default mode, press the MODE button (2) twice. Then press and hold SET/ C, F (3) for a few seconds; the value for the year will start to flash. You can use ADJ/MAX,MIN (4) to
change the value. If you press and hold the button, the value will change more quickly (this is also true when you are changing any other value with this button). When you have
0
0
reached the desired value, you can press SET/ C, F (3) again to move on to the other values, which are displayed in the order year - month - day.
To return to the default mode, press MODE (2) twice.
Setting the current time
0
0
In the default mode press and hold SET/ C, F (3) for a few seconds, then choose between the 12-hour and 24-hour time format by pressing ADJ/MAX,MIN (4). When you have
0
0
reached the desired value, you can press SET/ C, F (3) again to move on to the other values, which are displayed in the order hour - minute.
To return to the default mode, press MODE (2) once.
Setting the alarm
0
0
In the default mode, press the MODE button (2) once. If you press and hold SET/ C, F (3) for a few seconds, the alarm time will appear flashing. You can change the values using the
0
0
ADJ/MAX,MIN button (4). Press SET/ C, F (3) again to change the minute.
To activate the alarm, press MODE (2) in the default mode: this shows the current alarm time. Press ADJ/MAX,MIN (4) once to activate the alarm; the bell icon appears to show that the
alarm is turned on. If you press ADJ/MAX,MIN (4) again, the icon for hourly notifications appears. When this function is active, the product emits a short beep every hour. If you press
ADJ/MAX,MIN (4) a third time, both the alarm and the hourly notification function is active, which is indicated by both icons on the display. Pressing ADJ/MAX,MIN (4) a fourth time
turns off both functions. When you have reached the desired setting, press the MODE button (2) twice. When the alarm goes off, it is on for 1 minute. During this time, you can press
SNOOZE/LIGHT (6) to activate the snooze mode. The SNZ label appears flashing on the display while snoozing. If the product is in snooze mode, the alarm will sound again in 5
minutes until you turn it off by pressing another button.
Temperature and humidity display
The top part of the dual display shows the current temperature, humidity, and the current weather derived from these.
For both humidity and temperature, you can use ADJ/MAX,MIN (4) to show the recorded maximum or minimum values.
0
0
Pressing SET/ C, F (3) toggles between Celsius and Fahrenheit for the displayed temperature’s unit of measurement.
In the top part of the display, the product shows symbols representing the current weather based on the measured humidity.
Warnings
Do not expose the product to direct sunlight.
Do not place the product near an air conditioner, heater or fan.
Intensive heat or direct sunlight can cause the display to turn black.
When the displayed numbers start to fade, replace the battery.
Do not clean the product with aggressive or scratching cleaning materials.
Protect all units from extreme temperatures, moisture and dust.
Do not discard with communal waste. At the end of its life, dispose of product at a facility specializing in the collection of electronic waste. If you have any question or
remark in connection with this, contact the seller or local waste management organization. By doing so, you will protect the environment as well as the health of
others and yourself.
Battery disposal
Do not dispose of used batteries with normal communal waste. The user is obliged under law to take any used or dead batteries to the local collection facility or
point of original purchase. This allows the environmentally friendly disposal of batteries.
Technical parameters
0
Temperature measurement range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -10 – 60 C
0
Temperature display resolution: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 C
Humidity measurement range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 – 99 %
Humidity display resolution:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 %
Power supply: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x AA (1,5 V) batteries (not included)
Dimensions of the central unit / display: . . . . . . . . . . . . . 100 x 145 x 30 / 53 x 31 / 53 x 53 mm
HCW 13
1
6
7
MODE
ADJ
MAX/MIN
SET
0
0
C/ F
2 3 4
5
weather station
