8. The fountain's pump starts to circulate the water, and the LED light source lights up.
9. If the correct water pressure does not develop at first, connect it for 10 seconds, then pull
the adapter out of the outlet for 10 seconds. By repeating this 2-3 times, you can bleed
the pump, so the water flow will be correct.
10. You can change the speed of the water flow with the push switch on the side of the pump,
if necessary. We recommend that you prepare a mop and towel for the location so that
you can keep your surroundings and your hands dry.
11. After prolonged use, the evaporated water must be replaced.