NV MS 2+6
Before using the product for the first time, please read the instructions for use below
and retain them for later reference. The original instructions were written in the Hungarian
language.
Due to its Master-Slave function the distributor is ideal for supplying power to devices in the area of
computer, or TV environment. When shutting down the device connected to the Master marked socket,
the power supply to the devices in the Slave sockets is cut off, as such power saving can be achieved.
When turning on the master device, the Slave sockets will again have power applied to them.
PROPERTIES:
Main switch • Overload protection • 27000 Ampere overvoltage protection: TV, DVB-T (2 pcs
of coaxial socket); modem, telephone (RJ11); LAN, Ethernet (RJ45) and for every grounded socket • Light that
signals appropriate grounding • USB charging socket • master-slave sockets, teachable switch current and
indicator light • Normal socket, independent from the master socket
INSTRUCTION MANUAL
1. Turn on the distributor, whit its red main switch
2. Connect the MASTER device (e.g.: TV, computer, etc.) to the Master marked socket, and turn it on, so it
consumes power according to its operating state.
3. Press the blue SET button; this is how it can learn the master devices power consumption
4. The SLAVE sockets come under power after 5 seconds, so the connected devices can be operated
5. Shutting down the MASTER device, or after approximately 10 seconds when its output drops below the
value given in point 3., the SLAVE sockets turn off
6. The SURGE yellow light shows, if the overvoltage protection is active
7. The GOOD EARTH green light shows, if the grounding is appropriate
8. The USB charging sockets are operational, if the green USB light is lit
Technical data
1 6 SLAVE + 1 normal socket
250 V~ / 16 A / 2P+E
2
1,5 m H05VV-F 3G1,5 mm
MASTER: max. 900 W
SLAVE: max. 2300 W
TOTAL: max. 3680 W
USB A and USB MINI sockets: 5 V / total max. 1000 mA
o
vervoltage protected Master-Slave distributor
EN
