26
EN -Functions / H - Funkciók / SK - Funkcie / RO - Funcţii / SRB-MNE - Funkcije / CZ - Funkce /
HR-BIH - Funkcije
ELECTRIC WALL MOUNTED FIREPLACE
FEATURES
● electric wall-mounted decorative fireplace with built-in fan heater for heating the atmosphere of indoor premises ● attractive flame
effects ● tempered glass front panel ● energy saving LED light source ● adjustable brightness ● switchable output stages (1000 W /
2000 W) ● electronic thermostat ● weekly program ● adaptive ON / OFF control ● blow out point on the top ● overheating protection
● remote control included
OPERATION
The appliance can be operated using the push-buttons located on the top or using the remote control.
The unit may emit a slight odor when turned on initially, which is not a malfunction. It is harmless and evaporates quickly.
Set the main switch (5) to the I (ON) position, then it emits a short beep.
The appliance can be switched on or off using the I/O push-button
on top of the unit.
By being switched on, the flame effect begin to operate only, without any heating function. Holding the I/O button pressed will toggle
among five brightness settings for the flame effect. The built-in fan heater can be activated in two stages, 1000 W and 2000 W by using
the push-buttons. The appliance switches on and off depending on the set thermostat temperature. Pressing the same buttons again
will switch off the corresponding heating stage. The appliance can be switched off anytime using the I/O push-button.
The ON / OFF button (12) on the
remote control
functions in the same way as the I/O button on the appliance. The 1000 W and 2000
W buttons (16 and 17) on the remote can be used to switch on or off the corresponding heating stages. The currently selected stage
can be checked on the appliance. The DIMMER (18) button can be used to adjust the brightness of the flame effect in 5 increments.
To set
the date and the time
, turn on the unit with a remote control ON / OFF button (12), then press the DATE / TIME button (13).
First select the day, by pressing the „▲”, or „▼” symbols of the multi-selector (14) on the remote. Press the DATE / TIME button again
(13), then set the clock using the selector dial „+” and „-” buttons. Press the DATE / TIME button again (13), then set the minute using
the selector dial „+” and „-”buttons. Press the multi-selector (13) to store the set time by pressing the „OK” symbol.
SUN
MON
TUE
WED
THU
FRI
SAT
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Press the IC button on the remote control (15) for
automatic heating control.
If „AUTO” (27) appears on the display of the product,
the automatic heating selector is activated. Depending on room temperature and set temperature, the appliance automatically selects
the heating stage. To set the desired temperature, press the „+” or „-” symbol on the remote control selection button (14). Press the
„+” button to increase the temperature by pressing the „-” button to reduce the desired temperature in the range of 15 ° C to 30 ° C.
Press the remote control IC button (18) again to turn off the function, then AUTO (27) cannot be read on the display.
TIMER FUNCTION, ADAPTIVE ON / OFF CONTROL
The unit can store up to 10 programs at the same time, for each program you can set the ON / OFF time. The maximum length of each
program can be set to 23 hours and 50 minutes.
The product has adaptive switch-on regulation, it is able to predetermine the optimum time to start the heating process and start the
heating process in order to reach the set temperature at the desired time.
SET THE TIMING
1. Press TIMER SET on the remote control (21)
2. Use the „+” or „-” symbols on the multi-selector (14) to select the program number (23)
3. Press TIMER SET on the remote control again (21)
4. Use the „▲” or „▼” symbols of the multi-selector (14) to move the cursor (30) to the desired day (31) and press the „+” symbol to
select it. Press „-” to remove previously selected days
5. Press TIMER SET on the remote control again (21)
6. Use the „+” or „-” symbols of the multi-selector (14) to select the switch-on time (hours) (26)
7. Press TIMER SET on the remote control again (21)
8. Use the „+” or „-” symbols on the multi-selector (14) to select the switch-on time (minutes) (26)
9. Press TIMER SET on the remote control again (21). The display shows „OFF” (24)
10. Use the „+” or „-” symbols on the multi-selector (14) to select the switch-off time (hours) (26)
