4
1 Introduction
The PLM-Combi-Sensor expands the possibilities of your SOMNOtouch
TM
NIBP to record periodic leg
movements.
This instruction manual gives you information on the application and sensor specific settings. Please
note the main instruction manual of the SOMNOtouch
TM
NIBP.
Please refer to the safety notes in the main manual of the SOMNOtouch NIBP.
Device and sensors may not be used in live sustaining or life supervising
measures.
2 Initialization
I
n the Easystart menu, click “change to advanced mode” in the upper bar. Enter the patient data (see
chapter 6.1 of the main manual)
and switch to the tab “montage”. In the appearing window select the
existing montage
“SOT NIBP (xx)” (red arrow in figure below).
To add the PLM sensor to the sensor bar (green ellipse in former figure) click at the small black arrow
indicated by the green arrow.