C H A N N E L CHANGE
This transceiver is designed for three channel operation.
As the case
may be that the frequency condition is worse enongh for interférence
and others etc., channel can be changed and operated by the slide switch
located on the back of the unit.
Make sure that both transceivers have
the slide switch in the same positon.
S Q U E LC H C O N TR O L & A N L SW ITCH
1.
Turn the squelch control knob counter-clockwise to the stop position.
2.
If you turn up the volume, you will hear a background noise.
Then
adjust the squelch control knob turning slowly down to the comfortable
level tili noisy sound is elminated away.
3.
When interférence is of such magnitude that unit will not handle it,
the squelch control knob can be turned in a clockwise direction to
eliminate the noise.
In that case, the receiving and transmitting distances are reduced
with application of squelch control.
4.
To receive weak signais, turn the squelch control fu lly counter-
clockwise so that the ANL is switched OFF.
CAUTION
1.
This transceiver is a very sensitive instrument, handle it with care
and pay special attention to the antenna and speaker.
2.
Carefully watch your batteries. Weak batteries mean poor operation.
Remove the batteries, if the unit is to remain idle for along period.
Do not leave the transceiver on indefinately with the
AC/DC
Converter attached.
3.
Although high température will not harm or effect the operation, wet
or damp conditions could. Protect it from moisture.
4.
Use caution when the antenna is extended.
It may bend or break
from rough treatment.
5.
Be sure your set is off when not in use.
Otherwise you will waste
the batteries and possibly damage the set.
4
_
