SOMFY YSLO FLEX RTS 2P, Руководство по установке

Страница: 16 / 24

Copyright © 2013 - 2014 Somfy SAS. All rights reserved.
Yslo Flex RTS 2P
16
9. Checking and adjusting the rotation direction
- Press the button on the RTS control point until the two
output shafts rotate:
a) If the output shafts rotate in the opening direction, the
rotation direction is correct. Go to Section "Installing
stoppers".
b) If the output shafts rotate in the closing direction, the
rotation direction is not correct.
1) Press and hold the button no. 3 on the Yslo Flex RTS 2P
board:
- An output shaft moves back and forth with a beep: the
rotation direction has been modified.
2) Press the button on the RTS control point to check the
rotation direction.
10. Installing stoppers
10.1. Details
35 mm
40 mm
23 mm
30 mm
Stop
Composite
breakable stop
Buffer
• To avoid damaging the shutters in open position, position stoppers on the same level as the arms of
the motor behind the two shutter panels.
High position
a
b
2
1
OK
≈ 5 s
BIP
BIP... BIP