5
Copyright © 2013 Somfy SAS. All rights reserved.
Video door phone - V400 RTS
EN
CoNTRollINg Somfy RTS wIRElESS EqUIpmENT
[1].
Selected the channel associated with the equipment that you want to control by pressing the
channel selection button: the indicator light for the selected channel will flash.
Press the channel selection button (no. 8, page 2) as many times as necessary until the indicator
lights show the desired channel.
[2].
Control your equipment using the Open/On, STOP and Close/Off buttons on the monitor.
The equipment will react as stated in the table below:
press button:
Opening
On
Off
-
Close
Off
VIdEo ENTRy phoNE SETTINgS
Bell volume dial
This is used to adjust the volume of the monitor bell.
Screen colours dial
This is used to adjust the screen colours on the monitor.
Screen brightness dial
This is used to adjust the screen brightness on the monitor.
Speaker volume dial
This is used to adjust the volume of the monitor.
monitor
door station
►
adjusting the speaker volume
To adjust the door station speaker volume, use a screwdriver to turn the
button on the back of the door station:
•
clockwise to increase the volume,
•
anti-clockwise to reduce the volume.
►
Changing the monitor bell
There is a choice of two bells for the monitor.
To change the monitor bell, press and hold down the microphone activation button
for approximately 7 seconds. The new monitor bell
sounds twice.
To change the bell again, carry out the above operation again.
Button to
adjust the
speaker
volume
Canal 1 :
Canal 2 :
Canal 3 :
Canal 4 :
Canal 5 :
Channel 1:
Channel 2:
Channel 3:
Channel 4:
Channel 5: