EN
Tilt Only 50 WF RTS Central
12
Copyright
©
2019 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
3.2.2. Deleting the favourite position (my)
To delete the my position, press the
my
button to
move the product to this position, then hold the
my
button until the motorised product moves up and
down.
3.2.3. Adjusting the tilting speed
1) To reduce the tilting speed, press the
my
and
Down
buttons simultaneously
until the motorised product moves up and down. Repeat as needed. The
minimum setting has thus been reached when the motorised product briefly
moves 3 times in one direction then 3 times in the other direction.
2) To increase the tilting speed, press the
my
and
Up
buttons simultaneously
until the motorised product moves up and down. Repeat as needed. The
maximum setting has thus been reached when the motorised product briefly
moves 3 times in one direction then 3 times in the other direction.
3.2.4. Adjusting the speed
1) Move the motorised product to a position other
than its end limits. Press and hold the UP, MY and
DOWN buttons simultaneously until the motorised
product moves up and down briefly. The motorised
product automatically moves up and down in ten-
second cycles to confirm that speed setting mode
has been activated.
2) To increase the speed, press and hold the UP
button until the motorised product moves up and
down briefly. Repeat as needed.
!
The maximum speed is thus reached when the
motorised product briefly moves 3 times in one
direction then 3 times in the other direction.
3) To decrease the speed, press and hold the DOWN
button until the motorised product moves up and
down briefly. Repeat as needed.
!
The minimum speed is thus reached when the
motorised product briefly moves 3 times in one
direction then 3 times in the other direction.
4) To confirm the new speed, press and hold the MY button until the motorised
product briefly moves Up and Down.
3.3. TIPS AND RECOMMENDATIONS FOR USE
1
2
4
3
10 s
10 s
5148543A000_Tilt-Only-50-WF-RTS-Central_EN_SL.pdf 12
5148543A000_Tilt-Only-50-WF-RTS-Central_EN_SL.pdf 12
13/02/2019 11:50
13/02/2019 11:50