16
Copyright © 2008 Somfy SAS. All rights reserved.
Telis Soliris RTS
Removing the original control point.
-
Do not dispose of the original control
point with household waste, see para-
graph 2.3.
5.4 Timer
Move close to the product to install the
Telis Soliris RTS.
5.4.1 Checking the compatibility
-
Bring the product to the midway
position.
Cut off the mains power supply or
-
detach the battery connected to the
motor (eg for a battery operated roller
blind).
Remove the front cover:
-
Lever it with a flat, pointed tool
-
(such as a flathead screwdriver),
without using force, around the
upper section of the front cover to
detach it from its bracket.
-
The PROG button is located on top
of the screen and is shaped like a
tab (c).
Caution! If after removing the front cover,
no PROG button is found, this means
that the control point is not compatible:
the Telis Soliris RTS cannot be linked to
the product.
5.4.2 Adding the Telis Soliris RTS
Switch the mains power supply back on
-
or reconnect the battery to the motor.
-
Press the tab (c) until the product
moves briefly (or there is a series of
3 beeps): the programming function is
activated for approximately 2 minutes.
Take the new Telis Soliris RTS and turn
-
it over.
c
c
