SOMFY Telis 6 Chronis RTS, Руководство пользователя, Страница: 53 / 80

3
Telis 6 Chronis RTS
Copyright © 2010 - 2016 Somfy SAS. All rights reserved.
EN
5. Commissioning
%HIRUHXVLQJWKH7HOLV&KURQLV576ZHUHFRPPHQGWKDWHDFKPRWRULVSURJUDPPHGLQDGYDQFH
using an individual Telis 1 RTS type control point and that the limit switches of each motor are set.
However, like any RTS remote control transmitter, the Telis 6 Chronis RTS can be used for motor
commissioning operations (limit switch adjustment, etc.).
This manual only describes commissioning using an individual RTS control point such as Telis 1 RTS.
For commissioning with a different RTS control point, refer to the corresponding manual.
1
After 2 minutes of inactivity, the Telis 6 Chronis RTS screen switches automatically to sleep mode.
:KHQWKHVFUHHQLVRII¿UVWSUHVVDQ\EXWWRQWRWXUQLWRQ
When editing the settings, you can return to the operating mode (manual or automatic) at any time
by
pressing and holding the selection button ( 2QO\FRQ¿UPHGSDUDPHWHUVDUHVDYHG
5.1. Battery installation
- Remove the battery cover from the back of the Telis 6
Chronis RTS.
- Insert the 2 AAA (LR3) batteries following the polarity
indicated.
- Replace the battery cover on the Telis 6 Chronis RTS.
- Activate the Telis 6 Chronis RTS by pressing any button.
Never use rechargeable batteries.
Replace the batteries when the ( ) symbol appears on
the screen.
If there is no power supply for an extended period of time (batteries out of charge or removed), the
general parameters of the remote control transmitter will have to be reset. However, automatic
orders remain stored in the memory.
5.2. Setting the general parameters of the remote control transmitter
:KHQWKHEDWWHULHVDUH¿UVWLQVWDOOHG5HPRWHFRQWUROVHWWLQJVPRGHLVDFWLYDWHGGLUHFWO\6(7DQG
<($5DSSHDURQWKHVFUHHQZLWKWKH\HDUÀDVKLQJWKLVLVWKH¿UVWSDUDPHWHUWREHVHW
After an extended period of time with no power supply, when automatic mode is selected, "Remote
control settings" mode is also activated directly.
$WHDFKVWDJHWKHSDUDPHWHUWREHVHWÀDVKHV
- Press the arrow buttons ( or ) to change
the parameter (pressing and holding the
button scrolls the characters faster).
- To save the parameter and move to the
next parameter, EULHÀ\ press the selection
button ( ).
- "Remote control settings" mode can be
deactivated at any time by pressing and
holding the selection button ( 2QO\
FRQ¿UPHGSDUDPHWHUVDUHVDYHG
2 x LR03
AAA 1.5 V
2 s
5065945B_Chronis_6_RTS print.pdf 53 7/16/2020 9:50:00 AM 5065945B_Chronis_6_RTS print ok.pdf 53 7/16/2020 9:52:39 AM