Programming Continued
Deleting an automatic command
1. Using the selection button (
F
), switch to automatic mode.
2. Press the arrow keys (
G
) to select the open or close order that you
wish to edit (settings for all days or for groups of days if work or weekend
days have been configured).
3. Press and hold the selection button (
F
) until "SET" appears on the
screen: "Automatic command programming" mode is activated
and "EDIT" flashes.
4. Press one of the arrow buttons (
G
) to change menu until
"Delete" flashes.
5. Briefly press the selection button (
F
) to confirm the deletion.
Exit "EDIT" mode and return to automatic mode.
• To delete another automatic command, repeat steps 1-5.
page 6 of 8
Continued On Next Page
Figure C
F
11:00
07:30
G
yEAR
2021
7 Sec.
Setting the general parameters
of the remote control
transmitter,refer back to
section 4.
Modifying the general settings of the Telis 1 Chronis remote control
Figure C
1. Using the selection button (
F
), switch to automatic mode.
2. Press and hold the selection button (
F
) until "SET" and "YEAR" appear on the screen. The
"settings” mode is activated. The year flashes. This is the first setting to program.
3. Follow the steps in the section “Programming the remote control”.
