Battery Installation
Note:
The Sunis Outdoor WireFree™ RTS
Sun Sensor must be mounted to an
outside vertical wall. The mounting
location is critical (Fig. 3). Mount the
Sunis facing the direction the
window covering protects from the sun.
Ensure it is clear from obstruction that
could shade the covering during the day.
Continued On Next Page
1. Rotate the top cover clockwise to align the arrows on the base and sensor cover.
Then open the sensor by lifting the sensor top from the mounting base. (Fig. 1)
2. Install the batteries paying attention to the polarity shown on the base. (Fig. 2)
Mounting
Mounting the Sunis Outdoor Wirefree™ RTS Sun Sensor to an outside wall
1. First, Drill two holes 17mm apart (Fig. 4). Remember to use the correct bit type for the wall material.
2. Mount the Sunis Outdoor WireFree™ RTS Sun Sensor base with the up arrow facing up and the drain hole
facing directly down (Fig. 5) If appropriate consider using wall anchors.
Sensor Cover
Align
Arrows
Fig. 1
Fig. 2
Fig. 3
17 mm
Drain
Hole
Fig. 4
Fig. 5
