Please contact Somfy for detailed installation instructions at www.somfysystems.com or call 800-22-SOMFY
Sunea® RTS CMO Visual Reference Guide
Copyright © Somfy SAS 3/2019 P-0037
Step 2:
Check the direction of operation.
Press the
DOWN
button and confirm the
awning extends.
Step 5:
Press & hold the
MY/STOP
button until the
motor jogs to confirm the
limit setting.
Step 3:
Bring the awning to your desired
upper limit. Press & hold both the
MY/
STOP and DOWN
buttons until the awning
begins to extend, then release. Stop at the
desired lower limit, adjust by pressing the
UP or DOWN buttons.
Step 6:
To finalize briefly press the
PROGRAMMING BUTTON
on the back of
the transmitter. The motor will jog confirming
limit settings and is now in User Mode.
Double check limits as a precaution.
Step 1:
Initiate programming by pressing
both the
UP and DOWN
buttons at
the same time until the motor jogs.
(A jog is a brief in and out motion)
Step 4:
Press & hold the
UP
and MY/STOP
buttons until the
awnings begins to retract. The
motor will stop at the original
upper limit. Adjust if necessary.
SETTING FOR STANDARD AWNING: MANUAL UP AND DOWN LIMITS
Programming
Button
Step 5:
Press & hold the
MY/STOP
button until the motor jogs
confirming the limit settings. The
motor will then automatically set its
inner limit.
Step 3:
Bring the awning to your
desired lower limit. Press & hold
both
MY/STOP and UP
buttons until the awning begins to
retract, then release.
Step 1:
Initiate programming by pressing
both the
UP and DOWN
buttons at the
same time until the motor jogs.
(A jog is a brief in and out motion)
Step 4:
Press the
MY/STOP
button and stop the awning
halfway.
SETTING FOR CASSETTE AWNING: AUTOMATIC UP LIMIT
Programming
Button
Step 2:
Check the direction of operation.
Press the
DOWN
button and confirm the
awning extends.
Step 6:
To finalize briefly press the
PROGRAMMING BUTTON
on the back of
the transmitter. The motor will jog confirming
limit settings and is now in User Mode.
Double check limits as a precaution.
If the awning closes, change the direction by pressing & holding the
MY/STOP
button until the motor jogs. Confirm correct direction of
operation before proceeding.
NOTE:
In Programming Mode, the shade operates in momentary fashion. Motor will exit programming mode after 2 minutes of inactivity.
Connect motor to power. If programming multiple motors, power one motor at the time.
If the awning retracts, change the direction by pressing & holding the
MY/STOP
button until the motor jogs. Confirm before proceeding.
