SOMFY Skitter io, Руководство пользователя

Страница: 12 / 32

EN
10
Skitter io
Copyright © 2010 Somfy SAS. All rights reserved.
2) Connect the Skitter io to the computer
using the USB cable and follow the
instructions displayed on the screen to
create and save scenarios 1 and 2.
2
Cliquez sur installation incom
plète pour ajouter
des produits - Cliquer sur un produi
t pour l'identifier - Cliquer sur
son nom pour le renommer
- Unplug the Skitter io in accordance with the computer's
peripheral disconnect process.
Fit the customisation ring on the Skitter io. -
Ensure that the Skitter io is disconnected prior to use.
Press the - button (f) to run scenario 1.
Press the - button (g) to run scenario 2.
Press the - button (h) to stop scenarios 1 and 2.
The indicator light - (i) comes on green to indicate that the
order is executed properly, and orange to indicate a defect.
The battery indicator (j) comes on to warn that
the battery is low.
g
f
h
j
i
The Skitter io contains a magnet and can thus be attached to metal surfaces .
Use the adhesive support provided to place it on any other surface:
Check the radio range before 1)
installing the adhesive support.
Remove the protective fi lm from the 2)
support.
Stick the support in the desired 3)
location and press on it fi rmly to
ensure optimum bonding.
Place the Skitter io on the support. 4)
Using the Skitter io on a metal surface may reduce its radio range.
2 3 4
6. OPERATION
7. INSTALLING THE SKITTER IO
Radio frequency: 868-870 MHz, tri-band io-homecontrol® two-way,
“with LBT” (Listen Before Talk)
,
which searches for an unoccupied radio frequency prior to transmitting.
Radio range: 20 m through 2 concrete walls. The building in which the product is used may reduce
the radio range.
Protection rating: IP30.
Operating temperature: 0 °C to +60 °C.
Dimensions: Ø 64 mm, thickness 22 mm.
Power supply: 1 type N battery, 1.5 V.
USB port: type mini-B.
8. TECHNICAL DATA
5066049A00_Skitter _io.indb 10 15/07/2010 15:57:49