Copyright © 2012 Somfy SAS. All rights reserved
5
Rollixo io
EN
[1].
Press the outer left and right buttons on the previously memorised remote control simultaneously until
WKHJUHHQLQGLFDWRUOLJKWÀDVKHV
[2].
Press the button to be copied on the remote control already memorised until the indicator light on top
of the
Prog
button on the receiver comes on permanently.
[3].
%ULHÀ\SUHVVWKHRXWHUOHIWDQGULJKWEXWWRQVRQWKHQHZUHPRWHFRQWUROWRJHWKHU
[4].
%ULHÀ\SUHVVWKHVHOHFWHGEXWWRQWRDFWXDWHWKHPRWRULVDWLRQRQWKHQHZUHPRWHFRQWURO
The indicator light above the
Prog
EXWWRQRQWKHUHFHLYHUÀDVKHVWKHUHPRWHFRQWUROLVVWRUHGLQWKH
receiver.
Adding remote controls
This operation must be carried out close to the receiver.
This operation is used to copy the function of a button on a memorised Keygo io remote control (remote
control "A") to a button on a new Keygo io remote control (remote control "B").
Operation in automatic closure mode
Automatic closure of the door occurs after a time delay programmed during installation.
A new command during this time delay cancels automatic closing and the door remains open.
The following command results in the closure of the door.
Prog
Prog
[1]
[3]
[2]
[4]
Remote control memorised
Remote control to be memorised
