8
Page
© by Somfy GmbH
2 Installation
• Take off the top part of the Weather Station housing.
Be careful not to tear off the wiring connections
between the chip in the under part of the rain sensor
(wire with plug).
• Feed the cable (voltage supply, bus connection) through
the rubber seal (1) on the bottom of the Weather Station
and connect voltage and bus to the intended clips (2).
The supply line to the Weather Station must not
exceed 30m in length. The connection is made with
standard telephone cable, (J-Y(ST)Y 2 x 2 x 0,8).
1
+24V DC
2
GND
3
data
1
2
2.2 Electrical Connection
24V
GND
DATA
EXT.
KNX/EIB- Kombisensor AS 315N
1.4
Weather Station
9015079
Inside temperature sensor
9001461
EIB BUS cable
Mains
Branch
socket