SOMFY Maestria WT Series, Инструкция по эксплуатации, Страница: 49 / 124

49
Copyright © 2016 Somfy SAS. All rights reserved.
EN
Images not contractually binding
2. 4. 2. Restoring the original configuration
"
Use universal adjusting cable 9015971 (follow the instructions in the corresponding manual for
connection), or use a non-locking double push-button switch.
-
Press the adjusting cable "Up" and "Down" buttons simultaneously or the non-locking double push
button switch until the driven product moves up and down
once, then again.
•
The drive is back in its original configuration.
2. 4. 3. Questions about the drive?
Observations Possible causes Solutions
The driven product does not
operate.
The wiring is incorrect. Check the wiring and modify as
required.
The drive's overheating protection
has tripped.
Wait for the drive to cool down.
The cable used is not compliant. Check the cable and make sure
that it has 4 conductors.
The control point is not compatible. Check the compatibility and
replace the control point as
required.
The driven product stops too
soon.
The ring is not correctly installed. Secure the ring correctly.
The end limits are incorrectly
programmed.
Reset the end limits.
The end limit setting procedure
does not work a - er several
attempts.
The re-setting procedure has been
disabled.
Consult a Somfy contact.
8s