The Somfy Digital Network™ (SDN) RS485 Module for Glydea® ULTRA Motors integrates Somfy's range of
Glydea® ULTRA motors into stand-alone SDN systems. The SDN module receives SDN network communication
signals and converts them to motor control commands for operating Somfy's Glydea® ULTRA motors. The
module receives power directly from the Glydea® ULTRA. It is configured using the Somfy Motor Configuration
Software and offers control commands for open, close, stop and up to 16 intermediate positions. Also, the
RS485 Module for Glydea® ULTRA Motors can be programmed with up to 16 SDN group addresses.
I.
OVERVIEW
3 of 8
Follow the provided
SDN RS485 Module for Glydea® ULTRA Inbox Instructions
to remove bottom covers.
The RS485 Module for Glydea® ULTRA Motors is inserted into the bottom of the Glydea® ULTRA Motor.
M O U N T I N G & P O W E R
SDN Bus
CAT-5e or higher
Not to exceed 65 feet
Glydea® ULTRA
Motor Head
Power Plug
120V AC
RJ12 Connection
For Dry Contact (DCT) Only
C O M P A T I B I L T Y
▪
Modules are compatible with the following Glydea® ULTRA motors: Glydea® 35e ULTRA DCT #1003151,
Glydea 35e ULTRA RTS #1003152, Glydea® 60e ULTRA DCT #1003158, Glydea® 60e ULTRA RTS #1003159
I N S T A L L A T I O N
▪
Ensure the drapery track is properly installed and the drapery is hung
▪
Follow the
Glydea® ULTRA Motor Installation Guide
provided in the product box
C O M M I S S I O N I N G
▪
At initial Open or Close movements, the Glydea® ULTRA Motor will automatically run to record hard stop
positions. Depending on the type and weight of the drapery, end limits may need adjustment.
▪
To adjust, connect the DCT Setting Tool #9014599 for Dry Contact Control.
▪
Follow the
Glydea® ULTRA Motor Installation Guide
to make final end limit and direction adjustments.
▪
For Radio Technology Somfy® (RTS) pairing using the Glydea® ULTRA 35e and 60e RTS motors, the RS485
Module must be removed then reinserted after pairing of the first RTS control point is complete. The RS485
Module may remain inserted when pairing additional RTS control points or making end limit adjustments from
these controls.
▪
The Glydea® ULTRA
Motor may also be configured using the Somfy Digital Network™ (SDN) Motor
Configuration Software (see page 6 of this Guide).
