C - 0004
1. Press the Programming Button on the back
of the remote until the awning jogs.
2. Press the Programming Button on the Eolis sensor
until the awning jogs.
PROGRAMMING
3. Adjust the sensor dial to (4). (1= Most sensitive,
9= Least sensitive)
4. Put the sensor electronics back in the housing.
6. Test the sensor by pushing up and down on the
awning front bar or arm until it begins to retract.
You can use the remote to stop the awning after
5 seconds (first test mode).
7. Bring it back out and test it again. You can use
the remote to stop the awning after 5 seconds
(second test mode).
8. Make adjustments to the sensitivity if needed
and test it again.
5. Slide the housing back on the mounting plate.
NOTE: IF PROFESSIONAL PROGRAMMING ASSISTANCE IS REQUIRED.
PLEASE CONTACT SOMFY AT [email protected] OR YOUR LOCAL DEALER
AT www.somfysystems.com/locatedealer.
© Copyright SOMFY SYSTEMS, INC. 7/2009
PAGE2 REV1
Pen
Programming
Button
Programming
Button
