SOMFY INSTRUCTIONS
EOLIS 3D WIREFREE™
RTS WIND SENSORS
Part #’s
1816081 Eolis 3D WireFree
™
RTS Wind Sensor (white)
1816082 Eolis 3D WireFree
™
RTS Wind Sensor (off white)
1816083 Eolis 3D WireFree
™
RTS Wind Sensor (black)
The Eolis 3D WireFree RTS wind sensor detects horizontal,
vertical, and lateral movements. When preset threshold
is exceeded, awnings retract.
1. Make sure the "DOWN" button on
the remote extends the awning.
2. Clear awning of any debris and make
sure surface of awning is clean.
1. Remove the sensor housing using a
small screwdriver.
2. Install 2AAA alkaline batteries (included).
Make sure the red light blinks. If red light does
not blink, check batteries for correct polarity.
BEFORE YOU BEGIN
ADDING BATTERIES
C - 0004
© Copyright Somfy Systems, Inc. 7/2009
PAGE1 REV 1
Red
Light
Sensor Cover
Waterproof
Silicon Seal
Sensor
Electronics
Sensor
Housing
Mounting
Plate
3. Apply tape and
secure mounting
plate to front bar
of awning.
Awning
Awning
Front Bar
Eolis 3D
