manualshive.com logo in svg

SOMFY CONNEXOON, Инструкция по установке и программированию, Страница: 50 / 84

Поделиться
Скачать
SOMFY CONNEXOON Скачать руководство пользователя страница 50

50

Li-Ion motors

 

Advanced

Li-Ion motors, T

ilt&Lift 25 WF RTS, T

ilt Only 50 WF RTS

Attention

The driven product must be programmed.

Temporary sleeping mode

1  Activate Temporary sleeping mode

2  Deactivate Temporary sleeping mode

2 Activate the RTS

Motor jogs once and 

green LED

blinks 5 times

...motor jogs 

once

Motor jogs twice.

Motor jogs 

once.

Briefly press the Prog button on 

the motor head or plug in the 

charger.

Press and hold Prog 

button on the motor 

head until...

Briefly press Prog 

button on the motor 

head.

Briefly press Prog 

button on the motor 

head.

“Sleeping mode” is activated, green 

LED blinks 5 times to confirm, then 

orange LED blinks every second as 

long as the motor is in the temporary 

sleeping mode.

The drive will not respond to any control points commands for 15 minutes.

The control point commands are 

enabled. Green LED blinks 5 times.

Li-Ion motors

Содержание CONNEXOON





















































































Отзывы:

Нет отзывов