SOMFY AXORN 65 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 24

SOMFY AXORN 65 Скачать руководство пользователя страница 4

Use the garage door exclusively for:

- automatic opening and closure of door
- in private areas
- in accordance with the specification and safety instructions given in this
operating instruction

Important Safety Advice
Take care - For the safety of persons it is essential to follow all

the following instructions:

■

Retain these instructions and pass them on to the next owner. Read the introduction

completely before assembly and make particular note of the safety instructions.

■

Carry out the work in the recommended sequence and familiarise yourself with the

operation

■

After commissioning instruct all users on the function and operation of the door drive.

■

Open and close the door only when you can see the area covering the entire range of

movement of the door and when there are no persons or objects inside this area.

■

Only use authorised or recommended fixing elements, original spare parts and

accessories.

■

Replace damaged cables immediately (only by a qualified electrician).

■

Keep the radio transmitter in a safe place so that it cannot be inadvertently used, e.g.

by children etc)

■

Only install a door drive on a correctly installed and balanced door. Incorrectly

installed door can cause injury.

■

Before working on the door always disconnect the power supply

■

Never get hold of a moving door

Advice for persons wearing a pace maker
The power of the transmitter is within the permitted standards and is almost negligible.
To eliminate even the slightest risk we recommend that you do not operate the
transmitter close to your body. For your own safety point the handset to the garage
door with an outstretched arm before operating.

Safety Devices
Safety devices protect against injury and physical damage.
Never ignore or deliberately by-pass safety devices.

Automatic sensing of obstacles

If the door hits an obstacle on opening it will stop moving. As the door closes the
obstacle is cleared the door runs back up to the upper mechanical stop (reference point)
and then up to the programmed upper end stop

■

Check the function at least once per month (see chapter on "Commissioning". We

also recommend the installation of various safety devices (see "Accessories).

Preparations Prior to Installation

SOMFY Garage Door Drive AXORN 65/85

4

Important for
your safety

«
...
2
3
4
5
6
...
»

Содержание AXORN 65

























Отзывы:

Нет отзывов