10
Rollixo io
Diagnosis
Safety
brake
Diagnosis
Safety brake not connected or no connection to the connector between 5 and 6. Safety brake
activated (when connected between 5 and 6)
Consequences
No movement at all possible
Actions
Check the safety brake connection
Motor
Diagnosis
Motor not properly connected
Consequences
No movement at all possible
Actions
Check the motor connection
Diagnosis
Safety brake activated (if safety brake is connected between the blue wire of the motor)
Consequences
No movement at all possible
Actions
Check the installation and replace the safety brake
Diagnosis
Thermal motor protection switched on
Consequences
No movement at all possible
Actions
Wait approximately 10 minutes
Diagnosis
Motor defective or fuse blown
Consequences
No movement at all possible and flush lighting not on
Actions
Check the condition of the fusing and replace if required (spare fuse supplied). Replace the
motor if it is still not working
Motor
Diagnosis
Waiting for motor adjustment
Actions
Adjust the motor end points
Status of the LED
Meaning
LED is off
Installation working
LED flashes slowly
Waiting for an action or setting
LED flashes quickly
Detection/activation working
LED stays on
Failure/defect in the installation
Rollixo io
