Somatik Labs SLS-UV10W, Руководство пользователя

Страница: 10 / 20

8
horizontally or vertically, this is to avoid radiation
having direct contact with your eyes or skin.
You can disable the Inbuilt Safety sensor by
pressing the mode button for 6 seconds. The
wand will beep once to indicate that the safety
feature is disabled. Please ensure you protect
your eyes and the eyes of people close by from
the UV light when disabling the inbuilt safety
sensor.
The Safety Sensor will be disabled each time the
SLS-UV10W wand is Powered ON.
7.1 AUTO STANDBY
The wand will go into Auto Standby if there is
no operation being performed for more than 3
minutes.
7.2 CLEANING REFERENCE
To get the best cleaning results it is
recommended to clean slowly and spend multiple
cycles on cleaning on an object.
E.g. a normal size keyboard (450 x 150 mm)
would require 1 minute of cleaning with 2 cycles
of 30 second cleans each.
The suggested distance to sanitise an object
while holding the wand is 3cm apart.
PLEASE NOTE
Phones, devices, and other objects for sanitising
must be clean of any dirt or debris to ensure they
are properly disinfected. Only surfaces that are
exposed to the UV light can be disinfected.