IFEEL USB SENSOR
The iFeel USB Sensor is a highly accurate heart rate sensor that measures heart rate from a finger or ear.
Depending on the package you purchased you may have a Clip Sensor (for your finger or ear) or a Soft Rubber Finger
Sensor.
1)
Attach the Clip Sensor or Finger Sensor
to the thin
rectangular iFeel USB Sensor. If you have a
square watch-type connector with a display,
skip to the iFeel Bluetooth Sensor section.
2)
Remove the cap
on the rectangular iFeel USB
Sensor to expose the USB plug.
If you are using the Clip Sensor (shown to the right),
attach the small white shirt-clip to the blue cable, about
10 inches down from the end of the Clip Sensor. When
reading heart rate from your ear, attach the shirt-clip to
your shirt or jacket to hold the Clip Sensor up, so that
the Clip Sensor is not pulling down on your ear.
3)
(Optional)
Attach the long USB extension cord
to the iFeel USB Sensor. The shorter
mini-USB converter is for use on Android devices.
4)
Alive 2.6 or higher must be installed before you attach the iFeel USB Sensor to your computer!
Once Alive is installed, plug the iFeel USB Sensor into a USB port on your computer.
5)
Place the heart rate sensor on your ear, or on the middle or index finger of your non-dominant
hand
(your left hand if you are right-handed).
6)
Open Alive and start training.
