32
8.1 Error Indication
If there is error with the system when it is powered up, then the status indicator
will flash red; the number of flashes will indicate the type of error.
The table below describes the error indication, and a few possible actions that
can be taken to rectify the problem. The actions listed are not in any particular
order and are suggestions only; the intention is that one of the suggestions may
help you clear the problem. If in doubt, please consult your dealer or customer
service engineers.
8.1.1 The wheelchair can’t be driven when there’s an error that influences the
safety.
8.1.2 After the error is cleared, the wheelchair can be driven again.
Error Indication Table
Flash code Error description
Possible action
1
Remote / joystick error
Check cables and connectors
Replace the Remote
2
Network or
configuration error
Check cables and connectors
Recharge the battery
Check charger
Replace modules
Contact the dealer
3
Left motor error
Check cables and connectors
Replace Power Module
Check and/or replace left motor
4
Right motor error
Check cables and connectors
Replace Power Module
Check and/or replace right motor
5
Left park brake error
Check cables and connectors
Check left park brake is released
Replace modules
6
Right park brake error
Check cables and connectors
Check right park brake is released
Replace modules
Содержание SP-100
Страница 1: ...User manual SP 100 ...
Страница 44: ...35 LED flashed one after another from left to right Battery is charging ...
Страница 52: ...110401000158 Release Date Mar 2021 V 03 ...