18
5.4.5.1 To lock the wheelchair
5.4.5.1.1 While the control system is on, press and hold the power button for 4
seconds. The power indicators will flash.
5.4.5.1.2 The wheelchair is now locked.
5.4.5.2 To To unlock the wheelchair
5.4.5.2.1 While the control system is off, press the power button and pree the horn
button 2 times. The power indicators will flash.
5.4.5.2.2 The wheelchair is now unlocked.
5.5 Motor Brakes
5.5.1 Electro-magnetic brakes operate automatically when the controller joystick is
central with a delay of approximately 1/2 second. The controller automatically
provides progressive deceleration before the electro-magnetic brakes come
into operation.
5.5.2To check the brakes are operating correctly: switch the wheelchair on and
move the joystick in any direction.The brakes should disengage. Repeat this
check in all four directions ensuring the brakes engage each time the joystick
is released to its central position. An audible click from each motor indicates
the brakes are working.
5.6 Freewheel Levers
The freewheel levers to allow manual pushing of the powered wheelchair if
required.
5.6.1 Freewheel Mode: This is to allow manual pushing of the powered wheelchair.
To set the chair into freewheel mode, push up the levers positioned at the
both sides of the chair. When the levers are pushed up completely, then
release the levers, and the powered wheelchair is now in freewheel mode.
(Figure 5.16)
5.6.2 Drive mode: Make sure to pull both the levers down, and then the wheelchair
can be driven by motor power. (Figure 5.17)
Содержание SP-100
Страница 1: ...User manual SP 100 ...
Страница 44: ...35 LED flashed one after another from left to right Battery is charging ...
Страница 52: ...110401000158 Release Date Mar 2021 V 03 ...