SOMA SM-100.3 Series, Руководство пользователя

Страница: 8 / 12

5
3.2.4 Folding is now completed.
Figure 4.6 Figure 4.7 Figure 4.8
3.3 Rear Wheel Attachment
3.3.1 Pick up the wheel: Hold the center of the rear wheel by grasping two
adjacent spokes with four fingers of one hand, use the thumb to depress
and keep depressed the quick-release. Take the quick-release axle and
depress the button in its center. This retracts the bearings at the opposite
end of the axle. This will allow you to push the axle through the center of
the hub of the wheel. Your wheels are now ready to be assembled to the
frame of your wheelchair.
3.3.2 First ensure that the brake is in the OFF position. Take up the
assembled wheel and axle and depress the button in the center of the
axle, as above. This retracts the ball bearings that will allow you to push
the axle into the wheel bracket that is located on the lower rear frame of
the wheelchair. When you remove your thumb from the button on the
axle, the ball bearings should be visible protruding from the axle at the
back of the wheel bracket. This will secure the wheel safely in the frame.
(See Figure 4.10)
Figure 4.9 Figure 4.10
3.4 How to Use the Tipping Lever