SOMA LYRA 4, Руководство пользователя, Страница: 2 / 14

LYRA • 8 USER MANUAL
STRUCTURE
LYRA is based on eight generators, which will be referred to as voices. Their design is not like
a traditional subtractive synthesis VCO. Instead of having a linear or logarithmic dependency
on control voltage, they resemble the tone generators in old electric organs. Hence the use
of "voices" instead of "VCOs" in this manual. Lyra uses non-linearity a lot, and the voices
are constructed in such a way that allows for non-linearity to express itself.
The voices are divided into four pairs (12, 34, 56, 78). All the pairs are divided in two groups,
with two pairs in each (1234, 5678).
Each voice has its own TUNE knob. FAST, MOD, modulation source selector and SHARP af-
fect two voices simultaneously. HOLD and PITCH control the whole group of two pairs/four
voices. VIBRATO, TOTAL FB and the FM structure switch control all eight voices together.
The voices can function either in an eight-voice electric organ mode, or in an FM synthesis
mode with each of the voices and its envelope acting as a separate FM operator. The voice's
impact on FM synthesis will decrease along with the decay of its envelope.
There's a CV IN (on the rear panel) to modulate the selected voice groups with an external
signal.
The HYPER LFO is a complex low-frequency generator, whose waveform is synthesized from
two simple LFOs by summation or multiplication of their frequencies. It also has an FM
synthesis mode. The LFO can modulate the selected pairs of voices and the MOD DELAY.
The MOD DELAY consists of two lines of delay with cross-feedback and a special architec-
ture that enables resonance between the two lines. Each line's delay time can be individually
modulated from various sources, including external ones.
The DISTORTION is last in the chain, after the delay. It enables the delay to also influence
the distortion.
For all its experimental character, LYRA is a professional instrument. Its output dynamics are
balanced, so that even in extreme modes it won't harm an amp or speaker on-stage. The
frequency response has been adjusted for live performance, where you naturally have that
screaming high-midrange and not enough low-end. To compensate for this, low frequencies
have been boosted a little, while the highs sound softer. Unless you push the limits and use
extreme modes of course…