16
SOMAport Setup Guide
Cables
The following cables are supplied with the SOMAport.
SAU light
This light indicates which antenna is being used. See
USB port
This port provides an alternative method for connecting a
USB-compatible computer or hub to the SOMAport.
Ethernet port
This port connects a computer or a hub to the SOMAport. A straight-
through cable is used for direct connection to a computer or to the uplink
port on a hub. A crossover cable is used for connection to the Ethernet port
on a hub.
The Ethernet lights are located on this port. They indicate the status of the
Ethernet connection. See
“Ethernet status lights” on page 61
Telephone jacks
These jacks connect telephones to the SOMAport.
Power jack
The power supply plugs into this jack.
Part
Description
Cable Type
Description
Ethernet
If your computer has an Ethernet card, use the Ethernet
cable to connect your computer to the SOMAport.
Ethernet cables look similar to telephone cables. However,
you can tell the two apart because the connector on an
Ethernet cable is approximately twice as large as the
connector on a telephone cable.
USB
If your computer does not have an Ethernet card, but has a
USB port, use the USB cable to connect your computer to
the SOMAport.
00096
00085
Содержание SOMAport
Страница 1: ...SOMAport Setup Guide Release 2 0 Part 003776A revision 04 TM ...
Страница 8: ...8 SOMAport Setup Guide ...
Страница 56: ...56 SOMAport Setup Guide ...